TP-Link TL-SF1008LP Installation Manual

Installation Guide
Unmanaged Desktop PoE Switch
Switches Explanation
Extend (1–4)
(for TL-SF1008LP/TL-SF1008P)
Off: Port 1–4 run at 10/100 Mbps and support PoE power supply up to 100 m away.
On: Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
Priority (1–2)/Priority
(except TL-SL1210MP)
Off: All the ports transmit data with the same priority.
On/On (1-2): Port 1–2 transmit data with a higher priority than other ports.
Note: For simplicity, we will take TL-SF1008P for example throughout the Guide.
Connection
Ethernet Ports (1-8)
Note:
1. TL-SL1210MP has two uplink ports, which typically connect to uplink devices like routers.
Uplink 1 is an SFP port and works with a 1000 Mbps SFP module. Uplink 2 is an RJ45 port.
2. PoE ports can also connect to non-PoE devices, but only transmit data.
3 . TL-SF1008LP can supply up to 15.4 W for each PoE port and 41 W for all PoE ports.
TL-SF1008P can supply up to 30 W for each PoE port and 66 W for all PoE ports.
TL-SF1009P can supply up to 30 W for each PoE port and 65 W for all PoE ports.
TL-SL1210MP can supply up to 30 W for each PoE port and 124 W for all PoE ports.
LED Explanation
Power
On: Power on
Off: Power off
PoE Status
Port 1–4 (for TL-SF1008LP/TL-SF1008P)/
Port 1–8 (for TL-SF1009P/TL-SL1210MP)
On: PoE power provided
Flashing: Current-overload/ Short-circuit
Off: No PoE power provided
Link/Act
Port 1–8/Port 1–9 (for TL-SF1009P)/
Uplink 1, Uplink2 (for TL-SL1210MP)
On: Link present but no activity
Flashing: Transmitting/receiving data
Off: No link
Extend
(for TL-SF1009P and TL-SL1210MP)
Off: Port 1–8 run at 10/100 Mbps and support PoE power supply up to 100 m away.
On (1-4): Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
On (1-8): Port 1–8 run at 10 Mbps and support PoE power supply up to 250 m away.
Isolation
(for TL-SF1009P and TL-SL1210MP)
Off: Port 1–8 can transmit data with every port.
On (1-8): Port 1–8 cannot transmit data with each other. They can transmit data only with the
uplink port.
PC
IP Camera
PoE MAX
Power
TL-SF1008LP
On: 34 W ≤ Total power supply < 41 W
Flashing: Total power supply = 41 W
PoE Status Off: Total power supply < 34 W
TL-SF1008P
On: 59 W ≤ Total power supply < 66 W
Flashing: Total power supply = 66 W
Off: Total power supply < 59 W
TL-SF1009P
On: 58 W ≤ Total power supply < 65 W
Link/Act
Flashing: Total power supply = 65 W
Off: Total power supply < 58 W
TL-SL1210MP
On: 117 W ≤ Total power supply < 124 W
Flashing: Total power supply = 124 W
Off: Total power supply < 117 W
DC Power Adapter
AC Power Cord
PoE Ports (1-4)
PoE Devices
AP IP Phone
PoE MAX