Table of Contents
Advertisement
Quick Links
Operating instructions
Converter
Art. no. 132 U
Wind sensor
Art. no. 132 WS
Wind sensor with converter
Art. no. 132 U WS
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Product image non-binding
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
kundencenter@jung.de
27.02.2024
82523863 j0082523863
www.jung.de
Advertisement
Table of Contents
Related Manuals for Jung 132 U
Summary of Contents for Jung 132 U
- Page 1 Operating instructions Converter Art. no. 132 U Wind sensor Art. no. 132 WS Wind sensor with converter Art. no. 132 U WS ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Product image non-binding Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de...
-
Page 2: Table Of Contents
Wind sensor with converter Table of contents Safety instructions ...................... 3 Device components ...................... 3 Intended use ........................ 4 Product characteristics ..................... 4 Information for electrically skilled persons ................ 4 Mounting and electrical connection................ 4 Commissioning ...................... 6 Technical data ........................ 7 Warranty ........................... -
Page 3: Safety Instructions
Wind sensor with converter Safety instructions Electrical devices may be mounted and connected only by electrically skilled persons. Serious injuries, fire or property damage are possible. Please read and follow the manual fully. Danger of electric shock. Always disconnect before carrying out work on the device or load. -
Page 4: Intended Use
Wind sensor with converter Intended use – The converter and wind sensor are used to protect a blind/shutter against de- struction due to excessively strong winds. The blind/shutter is moved to a safe end position and locked there until the wind drops below the set wind speed value. - Page 5 Wind sensor with converter ￭ Remove the housing lid of the converter by slackening the two screws (3). ￭ For rear cable insertion, penetrate the rubber sheath (6) and insert the cable (see figure 3). Figure 3: Converter connection compartment ￭ Fasten the device using two screws (10).
-
Page 6: Commissioning
Wind sensor with converter Commissioning DANGER! Electric shock when live parts are touched. Electric shocks can be fatal. During commissioning, cover the parts carrying voltage on the device and in their surrounding area. Switching the wind detector switch in the converter ￭... -
Page 7: Technical Data
SELV limit value AC 24 V~ Warranty The warranty is provided by the specialist trade in accordance with statutory require- ments. ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de... - Page 8 Wind sensor with converter www.jung.de 82523863 8 / 8 27.02.2024 j0082523863...
Need help?
Do you have a question about the 132 U and is the answer not in the manual?
Questions and answers