Page 1
INSTALLATION MANUAL PUSH PULL WALL MOUNT MODEL SERIES VESA DISPLAY SIZE MAX LOAD LGC-98110 PUSH PULL 400x400 to 98” to 110” 265 lbs (130 kg) WALL MOUNT 1600x800 www.logicav.in www.logicav.in...
Checklist Interface Join Part x 2 Connecting W-A: Concrete W-B: Fischer W-C: Washer x 8 Screw x 8 bracket x 2 Bar x 4 expansion plug x 8 M-A: M8 X 25 x 4 M-C: Metal M-D: M-E: M-F: M-G: M-H: M-B: plastic M6 X 25 x 4...
Page 3
2. Fixing the connecting Bar Choose below method for fixing wall mount. ATTENTION: Drilling the wall for the wall mount should be executed by a craftsperson only Exercise care to prevent any scar or damage to the wall. CAUTION : Wear safety glasses while operating power equipment.
4. Installation 1. Place the mount on the wall 2. Place the unit on the wall and make marks on the wall. Note: While marking make sure the mount is placed in a straight line using the surface leveler www.logicav.in...
Page 5
3. Drill the wall and insert the Fischer expansion plugs into the holes place the mount on the wall and insert concrete screw. (Refer W-A, W-B, W-C in the checklist) 4. Place the interface bracket on the TV/ display and insert the washer and screw. (Refer the checklist for the suitable screw and washer) www.logicav.in...
Page 6
5. Place the TV/ display on the wall mount www.logicav.in...
Page 7
Instruction for locking and unlocking of the display. • After hanging the display to the bracket to lock the display first push the right side of the display and lock the mount. In say way do at left side. • For unlocking of the display from the brcaket first push at right side of the display and unlock it first and then unlock the left side.
Page 8
Opened view Final view after installing the mounted display on the wall www.logicav.in...