Download Print this page

Logic LGC-7598 Installation Manual

Advertisement

Quick Links

INSTALLATION MANUAL
PUSH PULL WALL MOUNT
MODEL
SERIES
VESA
DISPLAY SIZE
MAX LOAD
LGC-7598
PUSH PULL
400x400 to
75" to 98"
265 lbs (120 kg)
WALL MOUNT
900x600
www.logicav.in

Advertisement

loading

Summary of Contents for Logic LGC-7598

  • Page 1 INSTALLATION MANUAL PUSH PULL WALL MOUNT MODEL SERIES VESA DISPLAY SIZE MAX LOAD LGC-7598 PUSH PULL 400x400 to 75” to 98” 265 lbs (120 kg) WALL MOUNT 900x600 www.logicav.in...
  • Page 2: Product Dimension

    Checklist W-C: Washer x 6 W-B: Fischer Interface W-A: Concrete Wall mount x 1 expansion plug x 6 bracket x 2 Screw x 6 M-A: M8 X 25 x 4 M-B: plastic M-C: Metal M-D: M-E: M-F: M-G: M-H: washer x 4 washer x 4 M6 X 25 x 4 Plastic x 4...
  • Page 3: Installation

    2. Installation Choose below method for fixing wall mount. ATTENTION: Drilling the wall for the wall mount should be executed by a craftsperson only Exercise care to prevent any scar or damage to the wall. CAUTION : Wear safety glasses while operating power equipment. Failure to comply may result in eye injury 1.
  • Page 4 3. Drill the wall and insert the Fischer expansion plugs into the holes place the mount on the wall and insert concrete screw. (Refer W-A, W-B, W-C in the checklist) 4. Place the interface bracket on the TV/ display and insert the washer and screw (Refer the checklist for the suitable screw and washer) www.logicav.in...
  • Page 5 5. After placing the mount to the wall, pull the swivel mount towards the front 6. Place the TV/ display on the wall mount www.logicav.in...
  • Page 6 Angle adjustment details 7. Rotate the three screw slightly, and than rotate the top knob anti-clockwise for angle adjustment next rotate the bottom knob clock wise, than tighten the three screw. 8. Rotate the three screw slightly, and than rotate the top knob clockwise for angle adjustment next rotate the bottom knob anti-clockwise, than tighten the three screw.
  • Page 7 Height adjustment details TOP SCREW BEFORE HEIGHT AFTER HEIGHT ADJUSTMENT ADJUSTMENT BOTTOM SCREW 9. Slightly loosen the below screw first and next rotate the top screw for height adjustment. (Refer allen key M-H in the checklist) www.logicav.in...
  • Page 8 Closed view Opened view Final view after installing the mounted display on the wall www.logicav.in...