Technical Data - AEG IKB64311FB User Manual

Problem
Heating up takes a long time.
The outer ring is not activated.
and a number come on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes

9. TECHNICAL DATA

9.1 Rating plate
Model IKB64311FB
Typ 61 B4A 00 AA
Induction 7.35 kW
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Left front 2300
Left rear 1800
Right front 1400
Right rear 2300
18 ENGLISH
Possible cause
Cookware is too small and receives
only a part of the power generated
by the cooking zone.
The diameter of the bottom of the
cookware is too small.
There is an error in the hob.
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 492 710 00
220 - 240 V / 400 V 2N, 50 - 60 Hz
Made in: Romania
7.35 kW
PowerBoost [W]
3700
2800
2500
3200
Remedy
For optimal heat transfer use cook‐
ware with bottom diameter similar to
the size of the cooking zone (i.e. the
maximum cookware diameter value in
"Technical data" > "Cooking zones
specification").
Use cookware with a bigger bottom di‐
ameter.
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
10 125 - 210
10 145 - 180
4 125 - 145
10 145 - 265
comes