Making Network And Lcd Panel Settings - Sony UP-DF760 Instructions For Use Manual

3
Press the F or f button to select the blue thermal film
for which you want to change the gamma curve, and
press the g button.
A screen for selecting the gamma curve appears.
The following explanation shows how to change the
gamma curve for size 14 × 17 (about 353 × 430 mm)
film.
4
Press the F or f button to move the cursor to the
desired gamma curve.
The gamma curve for SONY 1 has been pre-set, you
cannot change these settings.
The gamma curves for USER 2 to USER 20 can be set
to the desired value. For advice on the settings,
contact your Sony dealer.
Gamma curve
SONY 1
USER 2 to USER 5
USER 6 to USER 20 Not preset. For advice on settings,
34
Menu Operation
Setting
Default setting (standard and basic
curve)
Each gamma curve has been preset to
the proper settings based on the
SONY 1 gamma curve.
contact your Sony dealer. If you select
one of these gamma curves, USER 6
to USER 20, before setting, the same
setting as that of SONY 1 is applied.
5
Press the G button.
The unit returns to the screen of step 2 (blue thermal
film type selection screen).
6
Repeat steps 3 - 6 to change the gamma curve for the
remaining blue thermal film types.
7
Press the MENU button.
The menu screen closes and the unit returns to the
standard screen.
Making Network and LCD Panel
Settings
This section explains how to make network settings, and
how to adjust various LCD panel settings including
backlight operation, brightness, contrast, and display
language.
1,4
2,3
1
Press the MENU button to bring up the menu screen.