Table of Contents
Advertisement
Configuring Initial
Settings
Configure settings for the head mounted monitor's
display. These settings will be required each time you
turn on the monitor.
1
Select a language (first time only).
Use the v and V buttons to select a language, and
then press the MENU or B button.
Tips
The language selection screen will not appear again
after the first selection is made. If you want to change
the language, display the setup menu and change the
setting. For details, see "Modifying Settings"
(page 28).
2
Adjust the distance between lenses.
The lens span adjustment screen appears. Move the
lens span adjusters to perform adjustment until the
display is clearly visible.
When you are finished adjusting, press the MENU or
B button.
Tips
• If the display is not visible even after adjusting the
lens span, repeat the procedure in "Mounting the
Head Mounted Monitor" (page 21).
• If you are having trouble with adjustments, try
resetting the left and right adjusters to their middle
positions before attempting to adjust again.
26
Configuring Initial Settings
3
Read the instructions that appear on the screen.
After confirming its content, press the MENU or B
button.
4
Check the "I" mark and horizontal line displays.
Confirm that the horizontal line intersects each of the
three "I" marks that appear on the screen, and then
press the MENU or B button. The line does not need
to intersect across the middle of the screen.
Note
If the line fails to intersect even one of the "I" marks,
do not use the unit.
Correct display
Display error
5
Read the warning that appears concerning the risks of
prolonged use.
After confirming its content, press the MENU or >
button.
Tips
You can disable the appearance of this warning by
setting [Prolonged viewing warning] to [Off] in the
setup menu (page 30).
Advertisement
Table of Contents
