Introduction; Installation - LD LDCEPB10 User Manual

INTRODUCTION

Made of ABS, with an aluminium grille, the CE PB10 is a bi-directional loudspeaker great for providing coverage in public spaces
and circulation areas. It is fully IP55 weatherproofed with high impact resistance for demanding outdoor environments. It comes
with a built-in bracket for easy mounting. With a power rating of 10W and a frequency response of 180Hz to 16kHz, it projects
sound with ease.
FEATURES
• 10 W rated power
• 100 V Taps: 2.5 / 5 / 10 W
• IP55 weatherproof
• Built in mounting bracket

INSTALLATION

DANGER: Overhead mounting requires extensive experience, including the calculation of the load limit values of the
installation material and regular safety inspection of all installation materials and devices. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional. There is a
risk that devices that are incorrectly mounted and secured may come loose and fall down. This can cause serious injury
or death.
Before installation, make sure that the amplifier system to which the speaker is to be connected is switched off and
that the connection cables are de-energised!
1
Mount the speaker in a suitable position on a sufficiently stable surface.
Outdoor installation: Make sure that the speaker membrane is not standing in water.
2
Connect the desired transformer tap of the cable to the signal supply (see table).
CE PB10
2.5 W @ 100 V green
5 W @ 100 V yellow
10 W @ 100 V red
COM blue
6