Wall Mounting Brackets (Where Present) - Smeg SUK61PX8 Manual

11.3 Wall mounting brackets (where present)

The fastening system provided must be installed to ensure the appliance is stable. If installed correctly,
this system prevents the appliance tipping over.
1)
Use the adjustable feet to level the appliance at
3)
Use the same height on the wall to drill the
holes for fastening the brackets. The distance
between the centres of the holes is given in the
32
Instructions for the installer
the required height.
diagram above.
2)
Measure the distance from the index of the
opening to the floor.
4)
Before tightening the brackets fully to the wall,
check that the index on the brackets is at the
same height as the index on the back of the
appliance. Position the appliance, taking care
that the brackets are correctly inserted.