WEDGETAIL WT-IMUX21ON-2212 Installing

Download this manual

Isuzu MUX 2021 On

NSTALLING

AILS AND

Congratulations on the purchase of your quality

Australian made Wedgetail Roof Rack product,

please follow these instructions to ensure a safe

and correct fitment.

Raise Front Plate with a small flat head screwdriver

at the joining.

2. Remove the external plastic retainer clips from the

roof rail using a trim remover as shown in the image

below. Follow the same step for others as well.

3. Remove small cover plates and remove torx bolts.

OOF

ACK

WT-IMUX21ON-2212

4. Remove all the visible bolts, brackets, and rails from

the roof.

5. Apply silicone on all the roof channel mounting

holes to prevent any water ingress.

6. Bolt 6 lugs per side to all facing points with bracket

facing outwards.

7. Fit rails to the lug using 10mm hardware (wedgetail

logo facing to the front of vehicle)

| WEDGETAILRACK.COM.AU

Need help?

Do you have a question about the WT-IMUX21ON-2212 and is the answer not in the manual?

Page 1 6. Bolt 6 lugs per side to all facing points with bracket facing outwards. 7. Fit rails to the lug using 10mm hardware (wedgetail 3. Remove small cover plates and remove torx bolts. logo facing to the front of vehicle) COPYRIGHT TRADESMAN ROOF RACKS | WEDGETAILRACK.COM.AU...
Page 2 *Channel nuts to the top as shown in the diagram below 9. Place the Wedgetail Platform on the rails (Wind deflector mounting towards the front of vehicle), then rotate the channel nuts 90 degree in the channel on the underside of the platform until they lock into the channels.

Wt-imux21-2212