Placing The Load; Storage; Installation And Assembly; Placement - Electrolux WC170BKMZ Installation, Use And Maintenance Instructions

Placing the load

Before placing the load, make sure the way is free and that
the floor is flat and can take the load. Remove the appliance
from the wooden pallet, move it to one side, then slide it
onto the floor.

Storage

The machine and/or its parts must be stored and protected
from damp, in a non-aggressive place, free of vibrations and
with room temperatures between
where the machine is stored must have a flat support surface to
avoid deforming the machine or damage to the support feet.
ATTENTION
Appliance positioning, in-
stallation and disassembly
must be carried out by a
specialised technician.
ATTENTION
Do not make modifications to the parts sup-
plied with the appliance. Any missing or faulty
parts must be replaced with original parts.
As the appliance contains a flammable refrig-
erant, it is essential to ensure that the refriger-
ant pipes are not damaged.
The quantity and type of the refrigerant used
in your appliance is indicated on the rating
plate.
Standard EN378 specifies that the room in
which you install your appliance must have a
volume of 1m³ per 8 g of hydrocarbon refriger-
ant used in the appliances. This is to avoid the
formation of flammable gas/air mixtures in
the room where the appliance is located in the
event of a leak in the refrigerant circuit.

Installation and assembly

To ensure correct operation of the appliance and maintain
safe conditions during use, carefully follow the instructions
given below in this section.

Placement

For safety and operational reasons, the appliance must not
be installed outdoors.
The appliance should be placed on a level surface in a dry,
well ventilated room (max. 75% relative air humidity). Never
place the appliance clo se to sources of heat such as cookers
or radiators, and avoid placing it in direct sunlight.

Ambient temperature

The climate class is stated on the nameplate. This specifies the
optimum ambient temperature. Wine coolers with winter posi-
tion, however, function at ambient temperatures as low as 5ºC
32
-10°C and 50°C. The place
ATTENTION
The above operations must
be carried out by the spe-
cialised technician in con-
formity with the current
safety regulations, regard-
ing the equipment used and
the operating procedures.
Before moving the appli-
ance make sure the capacity
of the lifting equipment
used is suitable for its
weight.

The customer's responsibilities

The surface on which the appliance is to be placed must be
level. Do not use a frame or similar.
The appliance can be installed as a free-standing unit against
a wall, built into a closet or lined up with other appliances.
It is important that the appliance be well ventilated and that
air can circulate unhindered above, below and around it.
The figures below illustrate how the necessary air circulation
around the appliance can be ensured