Download Print this page

Smeg SLB12SB Instruction Manual page 9

Hide thumbs Also See for SLB12SB:

Advertisement

Press the button to
structions – explains how the door works and how to use it.
This knob lets you:
switch the machine on and off by moving it in either
direction from the
cal)
select
ric
by turning it in both directions
The knob does not move while the programme is running.
The programme is electronically controlled by the machine.
This LED indicates that the display is showing the total dura-
tion of the selected programme before the programme starts,
and the time remaining while the programme is running.
This LED indicates that the display is showing the maximum
spin speed for the selected programme. It stays on while spin
speed is being selected with the relative button.
During the heating cycle, this LED indicates that the pro-
gramme is in the washing water heating phase.
The display shows the following information:
1.
in hours/minutes. The stated value is an estimate
based on the machine's normal operating parame-
ters (size of load, incoming water temperature, etc.).
The program time may therefore be a few minutes
longer or shorter than stated here.
2.
Given in hours/minutes. When the time remaining
before the programme starts is less than 60 minutes,
this information is given in minutes/seconds.
3.
4.
- flashing STOP
5.
- END
6.
To find out which of the first 3 pieces of information are
shown on the display, check which of the LED's, C, D, or N
(the latter for models featuring the delayed start option) is lit.
Press the button repeatedly to select the required spin
speed. The following spin speeds are available:
spin disabled and stop with tub full. The ma-
chine does not perform the final spin and ends the
washing programme with water in the tub. To drain
the water, see the explanations shown in paragraph
5.14
for
speed increases by 100 rpm starting from 600 rpm
up to the maximum speed indicated for the model
programmes, speed increases by 100 rpm
. Chapter 5 – Washing in-
position (knob indicator verti-
within the various fab-
for the selected programme, given
(for models featuring this option).
: for
programmes,

Advertisement

loading