Advertisement
Quick Links
Tabletop TV Stand Instruction Manual
Rev01(A)
Model: APTVS07
Thank you for choosing this Alphamount product! At Alphamount we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact us.
support@alphamount.com
Advertisement
Related Manuals for Alphamount APTVS07
Summary of Contents for Alphamount APTVS07
- Page 1 Tabletop TV Stand Instruction Manual Rev01(A) Model: APTVS07 Thank you for choosing this Alphamount product! At Alphamount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
- Page 2 Before getting started, let's make sure this stand is compatible. Is the VESA pattern Yes - Perfect! of your TV 100 x 100mm (3.9 x 3.9″) to 600 x No - This stand is NOT 400mm (23.6 x 15.7″) ? compatible.
- Page 3 Supplied Parts and Hardware for Step 1 Left TV Bracket Right TV Bracket Washer Washer Spacer Spacer Spacer M4 / M5 M6 / M8 L2.5mm L10mm L22mm [B1] x 4 [B2] x 4 [F1] x 8 [F2] x 4 [F3] x 4 TV Bolt TV Bolt M4 x 12mm...
- Page 4 Tempered Glass Base Lower Support Pillar Supplied Parts and Hardware for Step 3 NOTE: The bolt is shown in actual size Allen Key Upper Support Pillar Cable Clip 5/32 (4mm) ″ [O] x 1 [K] x 1 Supplied Part and Hardware for Step 4 NOTE: The bolt is shown in actual size Bolt...
- Page 5 Step 1 Attach TV Brackets to Your TV 1-1 Select TV Bolts Hand thread bolts into the threaded inserts on the back of your TV to determine which bolt (M4, M6 or M8) to use. A minimum of 4-5 turns into the threading is required. Do not turn past the bottom of the hole.
- Page 6 1-3 Secure the TV Brackets to Your TV Arrow UP Option A: For Flat Back TVs C1/D1/E1 B1/B2 (If needed) (If needed) Add spacers if needed to fit the bolt length and TV back. Option B: For Curved TVs C2/D2/E2/E3 B1/B2 F1/F2/F3 Spacers must be tall enough so that the curved back of the...
- Page 7 Option C: For TVs with a Bump C2/D2/E2/E3 B1/B2 F1/F2/F3 C1/D1/E1 B1/B2 (If needed) (If needed) The TV brackets must be flush on the bump and leveled by spacers on the gap. Option D: For TVs with Protruding Cables C2/D2/E2/E3 B1/B2 F1/F2/F3 Use spacers [F1], [F2] or [F3] to create extra space between the...
-
Page 8: Step 2 Assemble The Base
Option E: For TVs with Recessed Holes C2/D2/E2/E3 B1/B2 F1/F2/F3 Spacers [F1], [F2] or [F3] need to fill in the recessed holes on the back of the TV, while keeping the TV brackets as close to the TV as possible. Step 2 Assemble the Base 2-1 Place the rubber feet [H] to tempered glass base [01]. - Page 9 2-2 Connect the lower support pillar [02] to tempered glass base [01]. You may need assistance with this step. (Plastic Washer) (Plastic Washer) (Steel Washer) (Steel Washer) Connect the Upper Support Pillar [03] to Lower Support Pillar Step 3 [02] NOTE: There are three choices for #1 The First Choice...
- Page 10 Connect the Front Support to the Front Side of Upper Step 4 Support Pillar [03] NOTE: Do not fully tighten these two bolts [P1] until the other front support [05] is inserted into the connecting plate [06].
- Page 11 Ensure the all four bolts [P1] are fully tightened. Step 5 Hang the TV on the Stand 5-1 Slightly unscrew the pre-assembled bolts [S]. Phillips Screwdriver （Not Included）...
- Page 12 5-2 Hang the TV on the front support. 5-3 Tighten the bolts [S] until the bolts touch the front support. NOTE: Kindly note that the TV should be hung in the center of the front support to keep balance. HEAVY! You may need assistance with this step.
Need help?
Do you have a question about the APTVS07 and is the answer not in the manual?
Questions and answers