Download
Share
Print this page
Alphamount APPSLTK2 Instruction Manual
  1. Manuals
  2. Brands
  3. Alphamount Manuals
  4. TV Mount
  5. APPSLTK2
  6. Instruction manual

Alphamount APPSLTK2 Instruction Manual

Tv wall mount
Hide thumbs

Advertisement

Quick Links

Download this manual
TV Wall Mount Instruction Manual
V2.0
Model: APPSLTK2
Thank you for choosing this Alphamount product! At Alphamount we strive
to provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact us at
Email: support@alphamount.com (US/CA/DE/UK/FR/IT/ES/JP/AU)

Advertisement

loading
Need help?

Need help?

Do you have a question about the APPSLTK2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alphamount APPSLTK2

Summary of Contents for Alphamount APPSLTK2

  • Page 1 TV Wall Mount Instruction Manual V2.0 Model: APPSLTK2 Thank you for choosing this Alphamount product! At Alphamount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at...

  • Page 2: Important Safety Information

    Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at support@alphamount.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our customer service at support@alphamount.com. • Please note: Not all hardware included in this package will be used.
  • Page 4 Note: The bolts are shown in accordance with the actual size M6x15mm M6x30mm M8x15mm Bolt Bolt Bolt M8x45mm M8x65mm Bolt Bolt Supplied Parts and Hardware for Step 2 and 3 Wall Plate Extension Level Wall Plate Wall Plate Extension Note: The lag screw is shown in accordance with the actual size Lag Screw M7x55 mm CAUTION!
  • Page 5 Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at support@alphamount.com. CAUTION: Ensure the TV brackets [04] and [05] are EQUALLY CENTERED on your TV AND securely fastened in place.
  • Page 6 Option B (For Round Back TV) D2/ E2/ E3 (If needed) C1/ C2 Alternate Spacer Setups Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. D2/ E2/ E3 (If needed) D1/ E1 C1/ C2 (If needed) Alternate Spacer...
  • Page 7 Step 2 Assemble the Wall Plate Option A: DO NOT overtighten. 16 in. (406mm) stud spacing Tighten only until snug. VESA Pattern of TV: 100x100-400x400mm Tighten Option B: 18-24 in. (457mm-610mm) stud spacing VESA Pattern of TV: 100x100-600x400mm Loosen Tighten Step 3 Attach Wall Plate to Wall For wood stud installation, follow STEP 3A For concrete installation, follow STEP 3B...
  • Page 8 3A-1 Use a stud finder (not included) to locate wood studs or use an awl (not included) to verify the edges. Mark the edge and center locations. (not included) 3A-2 Position the wall plate [01] or [01, 02 and 03] at your desired height and line up the holes with your stud center line.
  • Page 9 3A-4 Install the wall plate [01] or [01, 02 and 03] using lag screws [A]. Tighten the lag screws [A] only until they are pulled firmly against the wall plate. 1/2 in.(13mm) Socket Wrench Step 3B Solid Concrete or Concrete Block Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1].
  • Page 10 3B-2 Drill 4 pilot holes using a 3/8 in. (10mm) diameter drill bit. Make sure the depth is not less than 2 23/64 in. (60mm). Never drill into the mortar between blocks. 2 23/64 in. (60mm) ø3/8 in. (10mm) 3B-3 Use the hammer to knock anchors [A2] into the wall.
  • Page 11 Step 4 Adjust Tilt Angles of TV Note: Do not over-tighten or over-loosen the bolts [S] 3/8 in. (10mm) Wrench Tighten Loosen Note：The tilt angles of the hooks on the TV brackets must be the same Loosen the 4 pcs tilt preassembled bolts [S] in both brackets [04 and 05]. Adjust the hooks [H] to your desired angle.
  • Page 12 Step 6 Secure TV Locking Press Pull down and hold both cords [R]. Press the bottom of the TV into the wall plate assembly [01] or [01, 02 and 03] until the latches lock the TV in place. Step 7 Remove the TV HEAVY! You may need assistance with this step.