Page 1
Table Top TV Stand Instruction Manual V2.0 Model: APTVS06 Thank you for choosing this Alphamount product! At Alphamount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact at...
If your TV VESA is greater than 400x400 mm/16x16 in. or less than VESA 100x100mm/4x4in., this TV stand is NOT compatible. If this TV stand is NOT compatible, please contact customer service at support@alphamount.com to find a compatible product. Tools Needed [Not Included] 5/32 in.(4mm) 5/16 in.(8mm)
Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact our customer service at support@alphamount.com. Please note: • Not all hardware included in this package will be used.
Page 4
Supplied Parts and Hardware for Step 3 (05) x2 TV Bracket Note: The bolts are shown in accordance with the actual size [TV1-1] x4 [TV1-2] x4 [TV1] M4 x 12mm M4 x 30mm [TV2] x4 [TV3] x4 M6 x 16mm M6 x 35mm [TV4] x4 [TV5] x4...
Supplied Parts for Step 4 (G) x2 Safety Lock Supplied Parts and Hardware for Step 5 (Optional) Note: The lag screw is shown in accordance with the actual size Lag Screw ST6.3 x 45 mm Washer CAUTION! Wall These anchors are for Anchor concrete or brick walls M8x40mm...
Page 6
Attach the support pillar [02] to tempered glass base [01] using Step 1-2 plastic cover [03], plastic washers [C], steel washers [D], bolts [B] and Allen key [I] Table Step 2 Connect the TV Plate to Support Pillar Connect TV plate to support pillar by using bolt [E], steel washer [D] and M6 nut [A] .
Page 7
We recommend thread engagement by at least 5 turns. -Too short will not hold the TV. -Too long will damage the TV. Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at support@alphamount.com.
Page 8
CAUTION: Ensure the TV brackets are EQUALLY CENTERED on your TV AND securely fastened in place. Note: Keep the arrow up. Note: The safety rope can be used based on your needs Option A (For Flat Back Note: The spacers must be used with steel washers [TV7] to stop TV1-1/TV2/TV4 the spacers from falling down.
Page 9
Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. Note: The spacers must be used with steel washers [TV7] to stop the spacers from falling down. TV1-1/TV2/TV4 TV1-2/TV3/TV5 (Optional) TV8/TV9 (if needed) TV8/TV9/TV10 Alternate Spacer Setups Alternate Setups Spacer...
Page 10
Step 4 Attach TV to the TV Plate and Manage the Wires TV brackets are two-height-adjustable. You can choose the proper height. Step 4-1 The second The first choice choice Step 4-2 Step 4-1 Hang the TV with brackets to the TV plate Step 4-2 Push the bottom of the TV to TV plate Step 4-3 Insert the safety lock [G] into the upward facing hooks at the midway to lower part of the TV bracket.
Page 12
Alphamount product! All of us at Alphamount do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
Need help?
Do you have a question about the APTVS06 and is the answer not in the manual?
Questions and answers