Advertisement
Quick Links
Tilt Wall Mount Instruction Manual
V1.0
Model: APMTK1
Thank you for choosing this alphamount product! At alphamount we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact at
support@alphamount.com (US/CA/DE/UK/FR/IT/ES/AU)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Alphamount APMTK1
Summary of Contents for Alphamount APMTK1
- Page 1 Tilt Wall Mount Instruction Manual V1.0 Model: APMTK1 Thank you for choosing this alphamount product! At alphamount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact at...
- Page 2 Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at support@alphamount.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our customer service at support@alphamount.com. • Please note: Not all hardware included in this package will be used.
- Page 4 TV Bolts (Only one bolt size fits your TV) Note: The bolts are shown in accordance with the actual size M4x30mm M6x15mm M6x35mm M8x20mm M8x35mm M8x50mm Supplied Parts and Hardware for Step 2 Wall Plate Note: The lag screw is shown in accordance with the actual size Lag Screw ST6.3x60mm Washer...
- Page 5 Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at support@alphamount.com. CAUTION: Ensure the TV brackets [02] and [03] are EQUALLY CENTERED on your TV AND securely fastened in place.
- Page 6 Option B (For Round Back TV) D1/D3/D5/D6 B1/B2 C1/C2/C3 Alternate Spacer Setups Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. D1/D2/D4 D1/D3/D5/D6 B1/B2 B1/B2 C1/C2 C1/C2/C3 needed) Alternate Alternate Spacer Spacer Setups Setups Option D For cable interference or inset holes, use spacers [C1], [C2] and [C3] to create extra space between the TV and TV brackets...
- Page 7 Step 2 Attach the Wall Plate [01] to Wall For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B Step 2A Wood Stud Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly against the wall plate [01].
- Page 8 2A-2 Position the wall plate at your desired height and line up the holes with your stud center line. Level the wall plate and mark the holes. 2A-3 Drill 4 pilot holes using a 5/32 in. (4mm) diameter drill bit. Make sure the depth is not less than 2 23/64 in.(60mm).
- Page 9 Step 2B Solid Concrete or Concrete Block Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly against the wall plate [01]. Ensure the wall plate is securely fastened to the wall before continuing to the next step.
- Page 10 2B-3 Use the hammer to knock Install wall plate using lag anchors [A3] into the wall. screws [A1] and washers [A2]. Be sure the anchors [A3] Tighten the lag screws [A1] are seated flush with the only until the washers [A2] are concrete surface.
- Page 11 Step 4 Secure the TV onto the Wall Plate HEAVY! You may need assistance with this step. Locking To Hang TV onto Wall Plate 1. Hang the TV with brackets [02] and [03] onto the wall plate [01]. 2. While pulling and hold the ropes, press the bottom of the TV into the wall plate [01] until the latches lock the TV brackets [02]and [03], then release the ropes.
- Page 12 Alphamount product! All of us at Alphamount do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
Need help?
Do you have a question about the APMTK1 and is the answer not in the manual?
Questions and answers