rting
setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE
selection and auto channel memory
automatically.
IMPORTANT:
Make sure that the antenna
or cable TV system connection
is made!
POWER
A/v
ENTER
CANCEL
÷
Press POWER.
The starting setup
function
begins
and the
Language
setup
menu
appears
on the screen.
Press •
or •
to select
your
desired
language,
then
press ENTER.
POWER
©
Press
•
or •
to select
"TV" or "CABLE",
then
press
ENTER.
Press •
or •
to select "START",
then press
ENTER.
If you select "CANCEL"
and press ENTER, the
STARTING
SETUP stops and changes to the TV
screen.
Now the "CH PROGRAM"
and "AUTO
CLOCK'starts.
After the starting setup is completed,
the TV
channel
appears
on the screen.
Notes:
• The starting setup function
will work only when you press
POWER for the first time.
• In "AUTO CLOCK" setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only "Time
of day" or "Local time zone".
• The process of "CH PROGRAM" may take 15 - 30 minutes
to complete, depending on your regional cable service.
• If you press CANCEL
in the process of "CH PROGRAM",
you can do starting setup function again.
w
{t}
C
÷
19
5V60101A
[E]p19-22
19
_
2/22/06,
1:03 PM