Connecting A Pc (Personal Computer); Power Source; Setting Up Your Tv/Dvd; Using The Remote Control - Toshiba 20HLV15 Owner's Manual

Connecting a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of
your PC's Resolution and Refresh rate. See "Monitor Display modes"
at right.
Connect one end of a (male to male) VGA cable to the video card of
the computer and the other end to the VGA connector PC at the side of
the TV/DVD. Fix the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cables to the audio
outputs of your Multimedia computer and to the AUDIO L and R
connectors of the PC IN jacks of the TV/DVD.
Set the video input source to PC mode (see "Selecting the video input
source" on page 31 and "Picture/Audio adjustments in the PC mode"
on page 41). The TV/DVD can be used as a computer monitor.
TV/DVD side panel
To PC

Power source

Power connection
To use AC power
1. Connect the AC cord to the AC adapter.
2. Connect the AC adapter plug into the TV/DVD's DC input jack.
3. Connect the AC cord into a wall outlet.
AC 120V,
To DC
60Hz
input jack
2
3
1
AC adapter AC cord
(supplied) (supplied)

Learning about the remote control

POWER turns the TV/DVD on and off
EJECT eject a disc (page 43)
TV/DVD switches between TV/Video input/PC and DVD
CHANNEL NUMBERS allow direct access to channels
CHANNEL M M M M M / ? ? ? ? ? cycles through programmed channels (page 24)
VOLUME + / – adjusts the volume level
ENTER sets programmed menu information (page 23)
EXIT/CANCEL exits programming menus or resets information in the
menu (page 23)
INPUT selects the video input source (page 31)
PIC SIZE cycles through the five picture sizes: Natural, TheaterWide
and full (page 33)
GAME game mode (page 24)
MENU/SETUP allows access to programming menus (page 23)
DISPLAY displays status information on-screen (page 40)
SLEEP programs the TV/DVD to turn off at a set time (page 35)
MUTE turns off the sound (page 38)
CLOSED CAPTION switch between TV/Caption/Text in Closed Caption
mode (page 35)
SUBTILTLE sets subtitle (page 50)
AUDIO SELECT switches the sound of TV/DVD and changes sound
track languages (page 50)
DVD MENU allows access to DVD menu (page 49)
TOP MENU allows access to DVD Top menu (page 49)
PLAY MODE sets repeat playback (page 47)
RETURN removes DVD setup menu (page 55)
MARKER index of DVD (page 46)
REPEAT A-B repeats playback between A and B (page 47)
ANGLE changes playback angle (page 49)
JUMP locates the desired point to play back (page 45)
CH RTN returns to the last viewed channel (page 25),
ZOOM allows you to zoom in (page 45)
SKIP 4 4 /¢ 4 4 4 ¢ skips DVD chapter (page 44) ¢ ¢ ¢
FF fast forwards a DVD, VCD, CD Audio, forwards playback
PLAY plays a DVD, VCD, CD Audio
REV rewinds a DVD, VCD, CD Audio, reviews playback
STOP stops a DVD, VCD, CD Audio
PAUSE pauses a DVD, VCD, CD Audio
SLOW / plays forward/reverse slowmotion
You will need:
• one VGA cable
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
SVGA 800x600 56.3Hz
SVGA 800x600 60.3Hz
XGA 1024x768 60Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
Notes:
• The current signal source does not display
when you return to TV mode.
• The on-screen displays will have a different
appearance in PC mode than in TV mode.
• When you select WXGA mode, set the
WXGA INPUT to ON in the PC PICTURE
menu (see page 41.)
Notes:
• Make sure to insert the plug of each cord securely.
• During use the AC adapter becomes warm. This is not a
malfunction.
WARNING:
• Do not connect this unit to the power using any device
other than the supplied AC adapter or power cord. This
could cause fire, electric shock, or damage.
• Do not use with a voltage other than the power voltage
displayed. This could cause fire, electric shock, or
damage.
• Never lift the AC adapter by holding the AC cord. The AC
adapter may fall, causing personal injury or equipment
damage.
CAUTION:
• Do not use the AC adapter if it is covered by a cloth etc.,
or pressed into a narrow area. This results in poor
dissipation of heat and may cause fire, electric shock, or
damage.
• When this unit is not used for a long time, (e.g., away on a
trip) in the interest of safety, be sure to unplug it from the
wall outlet.
• Do not plug/unplug the plug when your hands are wet.
This may cause electric shock.
• If you need to replace the supplied AC adapter or AC
cord, the specified AC adapter and AC cord must be used.
Contact the dealer that you purchased the unit from.
20
Sleep
Eject POWER
TV/DVD
Channel
Numbers
Display
Channel M M M M M /? ? ? ? ?
Volume +/–
Audio Select
Subtitle
Mute
Input/ZOOM
Enter
Play mode DVD menu
Menu/Setup
Exit/Cancel
Fav
Play
Pause Stop
Rev
FF
Closed Capton
Ch RTN
Skip
Slow /
Angle Marker
Top menu
Repeat A-B
Return
Game
Pic size
• Aim the remote control at the remote
sensor and press control buttons to
operate.
• Operate the remote control within a 30
degree on either side of the remote
sensor, up to a distance of approx. 16 ft.
(5m).
Remote
Sensor
Approx. 5 meters
22

Setting up your TV/DVD

Using the remote control

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.

Starting setup

The STARTING SETUP feature appears the first time you turn on the
TV/DVD, and helps you select the menu language, specify the TV/
CABLE setting, and program channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made!
1. Press POWER to turn on the TV/DVD. The starting setup function
begins and the language setup menu appears on the screen.
Press ▲ or ▼ to select your desired
language, then press ENTER.
2. Press ▲ or ▼ to select "TV" or
"CABLE", then press ENTER.
3. Press ▲ or ▼ to select "START",
then press ENTER. If you select
"CANCEL" and press ENTER, the
STARTING SETUP stops and changes to the TV screen.
4. Now the "AUTO SETUP" starts. After the starting setup is com-
pleted, the TV channel appears on the screen.
• If you press the EXIT button in the process of "AUTO SETUP"
the STARTING SETUP stops and changes to the TV screen.
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV/DVD using the
4/¢
menu system. You can access the menu system with the buttons on
the remote control.
• When you make a menu selection, your changes occur immedi-
ately. You do not have to press MENU or EXIT to see your
changes.
• After one minute, the menu screen will automatically close if you do
not make a selection. Your changes will still be saved.
• When you have finished programming the menus, press EXIT.

Changing the on-screen display language

You can choose from three different languages (English, French and
Spanish) for the on screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press MENU, then press
S E T U P
L A N G UAG E E N G L I S H
C L O C K S E T 1 2 : 0 0 A M
T V / C A B L E
C A B L E
C H P RO G R A M
A D D / E R A S E A D D
: S E L E C T : A D J U S T
2. Press ▲ or ▼ to highlight LANGUAGE.
E N G L I S H
1 2 : 0 0 A M
C A B L E
A D D
: S E L E C T : A D J U S T
3. Press or to highlight your desired language.
Note:
The TV/DVD remote control may not operate
your VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with
your other devices to see which features may
be available. Additionally, the remote control
for this TV/DVD may not support certain
features available on the original remote
controls for your other devices, in which case
it is suggested that you use the original
remote control for the applicable device.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly,
or if the operating range becomes reduced,
replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
21
L A N G UAG E / L A N G U E / I D I O M A
E N G L I S H
F R A N Ç A I S
E S PA Ñ O L
: S E L E C T E N T E R : S E T
or until the SETUP menu appears.
Note:
The position and size of the on-screen menus
change for some program formats (such as
1080i or 720p).
23
POWER
Enter
Exit
Menu