Table Of Contents - Xylem CentriPro FM Series Service Manual

CAUTION
Use ohmmeter only with POWER OFF.
Power supply OFF. Disconnect motor leads
(L1 and L2). On dual-voltage motors, motor
must be wired 230V for the checks listed
below and illustrated on the page indicated
for each check. Rewire for 230V if necessary.
CHECK:
a. Ground ..........................................................78
b. Winding Continuity ...............................79-81
c. Contact Points (Switch) ...............................82
d. Overload Protector ................................83-85
e. Capacitor ......................................................86
Page
77