To Select A Cleaning Cycle With A Delayed Start - Smeg SC115 Manual

Instructions for the user
The text "Piro" will appear on the display to indicate
that the oven is performing the cleaning cycle.
The time remaining to the end of the cleaning cycle
will also be shown.
Two minutes after the cleaning (pyrolysis) cycle
starts, a locking device which prevents opening of
the door will be tripped.
that the locking device has been activated.
At the end of the cleaning cycle the locking device
will remain active until the temperature inside the
oven has reached a safety threshold. When the oven
has cooled down, collect the residues from
automatic cleaning with a damp micro-fibre cloth.

To select a cleaning cycle with a delayed start,

after setting the duration press
current time will appear on the display.
Press or
when you want to start cooking.
A few seconds after the desired duration is set,
and will stay lit, and the oven will wait for the
starting time set for the cleaning cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for
If you need to interrupt the cleaning function, switch the appliance off
completely by pressing
will light up to indicate
.
to increase or decrease the time
to go out.
for 2 seconds.
and the
Temperature zone
Temperature zone
113