Your Data Services User Name; Data Connection Status And Indicators - Zte N9520 User Manual

2. Select LTE/CDMA. The phone will scan for the 4G network and will automatically
connect to it.
When your phone is connected to the 4G network, the 4G icon (
and tells you the approximate signal strength (number of bands displayed).
Note: The 4G network is self-discoverable, which means no additional steps are required for
your phone to connect to it.
Check 4G Network Status
■ Touch
>
The network provider name and IP address are displayed.

Your Data Services User Name

When you buy your phone and sign up for service, you're automatically assigned a user name,
which is typically based on your name and a number.
When you use data services, your user name is submitted to identify you to the network. Your
user name is automatically programmed into your phone. You don't have to enter it.
Update Your User Name
If you choose to change your user name and select a new one online, or make any changes to
your services, you must then update the profile on your phone.
1. Touch >
2. Touch Update Profile.

Data Connection Status and Indicators

Your phone displays the current status of your data connection through indicators at the top of
the screen. The following symbols are used:
Your phone is connected to the 4G network. When the arrows are animated, your phone is
transferring data (for example, when you are opening a Web page); when the arrows are gray,
your phone is connected to the network but is not currently transferring data (for example, when
you are viewing a Web page that is completely open). In either state, you can receive incoming
calls.
Your phone is connected to the 3G Mobile Broadband Network (3G). When the arrows are
animated, your phone is transferring data (for example, when you are opening a Web page);
Web and Data
> Settings > About phone > 4G settings.
> Settings > System updates.
) appears in the status bar
88