Check The Wireless Network Status; Connect To A Different Wi-Fi Network; Connect To A Wps Network - Zte N9520 User Manual

Table of Contents

Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for

your phone to connect to a Wi-Fi network. It may be necessary to provide a user name and

password for certain closed wireless networks.

Check the Wireless Network Status

Check the status of your current wireless network, including speed and signal strength, through

the Wi-Fi settings menu.

1. Touch

2. Touch the wireless network that the phone is currently connected to. You will see a

message box showing the Wi-Fi network name, status, speed, signal strength, and other

details.

Note: If you want to remove a wireless network's settings, touch Forget on this window. You

need to enter the settings again if you want to connect to this wireless network.

Use the Wi-Fi settings to scan for and connect to a different Wi-Fi network.

1. Touch

manually scan for available Wi-Fi networks, touch

2. Touch another Wi-Fi network to connect to it.

Note: If the wireless network you want to connect to is not in the list of detected networks, touch

+ at the bottom right of the screen, enter the wireless network settings and touch Save.

Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the access

point which support WPS.

You can use one of the following methods to connect your phone to a wireless network using

WPS.

Method one: WPS button (Recommended)

1. Touch

2. Touch

3. Press the WPS button on the access point and the access point will recognize your

phone and add it to the network.

Method two: PIN number

1. Touch

Web and Data

> Settings > Wi-Fi.

> Settings > Wi-Fi. Detected Wi-Fi networks are displayed. To

> Settings > Wi-Fi and touch the Wi-Fi slider to turn Wi-Fi on.

> Scan.

Table of Contents