Touchpal Keyboard - Zte N9520 User Manual

The following example shows how to enter the word "here". Put your finger on "h", and without
lifting, slide it to "e", and then to "r", and back to "e". When complete, lift your finger off the
screen and the matched words are displayed.
Tips for using Swype Text Input:
●
To enter double letters, scribble slightly or make a loop on the letter. For example, to get
the "ll" in "hello", scribble (or make a loop) on the "l" key.
●
Lift your finger at the end of the word. A space is added automatically when you "Swype"
the next word.
For more information about using Swype and its additional capabilities, including using voice
entry and personalizing your Swype dictionary, touch and hold
display and then touch How to Swype. You can also visit

TouchPal Keyboard

TouchPal keyboard offers three layouts, Full QWERTY, 12-Key PhonePad and CooTek T+.
You can swipe left or right on the TouchPal keyboard to switch the layout.
You can also use TouchPal Curve™ to speed up text input by replacing the key touching
operation with a tracing gesture where you can move your finger from letter to letter without
lifting the finger until you reach the end of the word.
To switch the keyboard layout:
1. Touch >
Keyboard layout.
2. Check Swipe layout.
3. In the TouchPal keyboard screen, touch
4. Swipe left or right on the TouchPal keyboard to select the Full QWERTY, 12-Key
PhonePad or CooTek T+ layout.
Phone Calls
> Settings > Language & input >
from the Swype keyboard
swype.com for more information.
(TouchPal Keyboard) >
and uncheck Curve, and then touch Close.
19