Advertisement

Quick Links

Altus 28
WireFree
EN
Instructions
ES
Instrucciones
FR
Notice
RTS Li-ion

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WireFree Altus 28 and is the answer not in the manual?

Questions and answers

Summary of Contents for SOMFY WireFree Altus 28

  • Page 1 Altus 28 WireFree RTS Li-ion Instructions Instrucciones Notice...
  • Page 2: Table Of Contents

    Any operation of the drive outside the sphere of application described above is prohibited. Such operation shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any failure to comply with the instructions given herein and in the enclosed Safety instructions document.
  • Page 3: Installation

    Standard bracket b) Drive plate for specific bracket For optimal radio reception, the motor antenna should be kept straight and should be positioned outside of headrail (if used). Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 4: Wiring / Recharging

    To ensure electrical safety, this Class III motor must be powered by a «SELV» voltage source (Safety Extra Low Voltage). Use power charger (recommended by Somfy) to charge the drive battery. Ensure battery is fully charged prior to installation. 1) Connect the charger to the cable attached to drive.
  • Page 5 Briefly press the control point programming button. The driven product will briefly move Up and Down to confirm pairing. control point is recorded “paired” to driven PROG. product. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 6: Tips And Advice On Installation

    4) To confirm the new position press and hold the MY button until the driven product briefly moves Up and Down. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 7 Up and Down. 3) Press the UP, MY and DOWN buttons simultaneously, until the driven product briefly moves Up and Down, wheel rotation is reversed. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 8 3) To deactivate the “Sleeping mode”, briefly press the motor head programming button. The driven product briefly moves Up and Down, the control point (transmitter) commands are enabled. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 9: Operation And Maintenance

    4) To tilt the slats, press and hold the UP or DOWN button or use the scroll of the remote control, until the slats reach the desired position. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 10: Adjusting The Tilting Speed

    3. 5. 2. To use the favorite (my) position The driven product must be stopped. - Briefly press the MY button: the driven product moves to the favorite (my) position. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 11: Adjusting The Speed

    1) Press and hold the motor head programming button until driven product briefly moves Up and Down. 2) Quickly press the control point programming button PROG. (B) to add or delete control point. Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved...
  • Page 12: Technical Data

    For additional information on the technical data for this drive contact your Somfy representative. SOMFY ACTIVITES SA, F-74300 CLUSES as manufacturer hereby declares that the drive covered by these instructions and used as intended according to these instructions is in compliance with the essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC, and the Radio Directive 2014/53/EU.

Table of Contents