Table of Contents
Advertisement
Making a Timer Recording
Before you start
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set
before you proceed with a timer recording.
(See page 27)
1
With the unit in Stop mode, press the
TIMER button.
DVD-RAM(VR)
Timer Record
Disc Navigation
Playlist
Disc manager
Programme
Setup
MOVE
OK
Using the MENU button.
With the unit in Stop mode, press the MENU
button.
Press the ...† buttons to select Programme, then
press the OK or √ button.
Press the ...† buttons to select Timer Record.
Press the OK or √ button.
2
• The Timer Recording screen is displayed.
DVD-RAM(VR)
Recordable Time 02:12 SP
No. Source
Date
Start
No. 01
01 -- -- -- - -- --:-- --:--
Source
Date
Start
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
Recordable Time 02:12 SP
MOVE
OK
3
Set timer recording option.
• Fill the input items using the arrow buttons and
number buttons.
œ √ : Moves to the previous/next item,
...†, 0~9 : Sets a value.
Timer Record
√ √
RETURN
EXIT
Scheduled Record List
End
Mode PDC Edit
--
--
√ √
End Mode PDC
Off
RETURN
EXIT
• Source : The video input source ("AV1", "AV2",
"AV3"), or the broadcasting
channel you want to make a timer
recording from.
• Date : Timer Recording allows setting the
recording time within one month period.
Set the recording day. (day/month)
01/JAN(SAT)
02/JAN(SUN)
03/JAN(MON)
30/JAN(SUN)
31/JAN(MON)
• Start/End Time : Start and end time of the timer
recording.
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to
set video quality automatically.
In FR mode, the most suitable record mode is
adjusted automatically, according to remaining
time on the disc and length of the timer recording.
This function will select only one suitable mode
from XP, SP, LP and EP modes.
- XP (high quality) : Select when video quality is
important. (Approx. 1 hour)
- SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
- LP (low quality) : Select when a long recording
time is required.(Approx. 4 hours)
- EP (extended) : Select when a longer recording
time is required. (Approx.6 hours or 8 hours)
• PDC : PDC(Programme Delivery Control)
function.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with the
actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer
recording will not take place.
- Do not select PDC unless you are sure the
programme you wish to record is broadcast with
PDC.
When you are recording at EP mode on a
DVD-RW(V)/R disc, it may not record the
NOTE
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING
system. For example, if you record a
program with a lot of action, it uses a
higher bit rate which in turn consumes
more disc memory.
Every Day
MON-SAT
MON-FRI
Every SAT
Every SUN
49
English -
Advertisement
Table of Contents
