Table of Contents
Advertisement
Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not supplied) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV.
2. Connect audio cables (white and red) between the AV
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier). (See pages 22~23)
You will enjoy high quality images.
Case 3 : Connecting to
Component Video output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
DVD Recorder and COMPONENT IN(Y,P
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 22~23).
3. After connecting, refer to page 36 to 37.
You will enjoy high quality and accurate color
reproduction images.
2
COMPONENT
green
Y
blue
Pb
red
Pr
Make sure that the colour coded
connections match. The Y, P
NOTE
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
Progressive setting is only available when
the Video Out is set to Component.
(See page 36)
,P
) jacks on
B
R
,P
) jacks
B
R
1
, P
B
R
21
English -
Advertisement
Table of Contents
