Table of Contents
Advertisement
Plug & Auto Set up
Your DVD Recorder will automatically set itself up when
it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few
minutes. Your DVD Recorder will then be ready for use.
1
Connect the RF cable as indicated on page
19.
(Connecting Your DVD Recorder to the TV Using the RF
Cable and scart cable.)
2
Plug the DVD Recorder into the mains.
"AUTO" in the front panel display flickers.
Start the auto setup.
3
Auto setup will be started.
Check antenna and TV cable connection.
4
Auto Channel scan will be started.
• The number of stations automatically stored by the DVD
Recorder depends on the number of stations that it has found.
26
- English
OK
Cancel
Channel scan
Now, Scanning.
5%
5
After Auto Channel Scan is completed, Auto
Clock Setting will be started automatically in
10 seconds. If you want to start Auto Clock
Setting immediately, press OK button.
If you do not want to do Auto Clock Setting,
press CANCEL or MENU button.
Auto channel scan completed successfully.
Press [OK] button to auto clock set.
OK
Wait until current date and time are
6
displayed automatically. If you want to exit
Auto clock setting, press MENU button.
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
7
Check the date and time.
No Disc
Programme
Setup
Time
Date
12 : 00
01 / JAN / 2005
MOVE
OK
RETURN
• if it is : Correct, press OK button then the date and time will
be saved. If you don't press the OK button, the date
and time will be saved automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year using †...œ
√ buttons or number buttons. Press OK button then
the date and time will be saved. When you need to
change clock setting, you can set
(See page 27)
Now, DVD Recorder is ready for use. Function for
"Plug & Auto Setup" is fixed already. So if you want
NOTE
to change this fixed one, you can change it by
Presetting the Stations in OSD "Presetting
Channels with the Manual set up function" menu.
(See page 29)
Auto Set up function can be performed by pressing
é (STOP) on the unit continuously for 5 seconds or
more during power off with no disc inserted.
Cancel
Clock Set
Auto Clock
SAT
On
EXIT
it
up manually.
Advertisement
Table of Contents
