Box + Tv; Step 3 : Other Type Of Connecting The Video Output Cable; Output Cable; Method 1 : Connecting To A Composite Video Output - Toshiba D-R3 Owner's Manual

00566A-D-R3_14~35 8/31/04 10:28 AM Page 17
Step3 : Other type of
connecting the Video

output cable

There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.

Method 1 : Connecting to a Composite Video output

jack

Method 2 : Connecting to an S-video output jack

S-Video Output Modes
S-Video output are available only if your TV supports
S-Video input. If S-Video output does not work, check
the TV connections and the TV input selection
settings. (For information on how to connect to a TV,
see pages 15 to 16.)
Method 1 : Connecting to a
Composite Video output jack
Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) IN jack on the TV (or AV amplifier).
You will enjoy regular quality images.
Connect audio cables( white and red) between the
ANALOGUE AUDIO OUT jacks on the DVD Recorder
and AUDIO IN jacks on TV( or AV amplifier).
(See page 18)
Method 2 : Connecting to an
S-video output jack
Connect an S-video cable(not supplied) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN
jack on the TV (or AV amplifier).
You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
17
English -