PRODUCT DESCRIPTION AND INTENDED USE The DOMIW3C transmitter is designed to control automations (gates, garage doors, road barriers and similar). CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual...
This procedure (Figure 3) allows for modifying the type of encoding MEMORISING THE TRANSMITTER (“O-Code” or “BD”). DOMIW3C is configured by default with the two-way “BD” radio encod- ing. If the system’s automation uses the one-way “O-code” encoding sys- MEMORISING THE TRANSMITTER To memorise the transmitter in a receiver, the following procedures can tem, the “encoding switch”...
This procedure can be used to restore the transmitter’s factory conditions. At the end of the procedure, all the The DOMIW3C transmitter has a secret code, the so-called “ENABLING previously memorised settings will be lost. CODE”. By transferring this code from a memorised transmitter to a new...
SIGNALS PRODUCT DISPOSAL SIGNALS PRODUCT DISPOSAL This product is an integral part of the operator and must therefore be disposed of with it. As with the installation, only qualified personnel must dismantle the prod- uct at the end of its life. This product is composed of different types of materials.
ACCESSORIES TECHNICAL SPECIFICATIONS ACCESSORIES The transmitter DOMIW3C can be fitted with plates for wall mounting. All technical specifications stated in this section refer For mounting the plates to the wall: to an ambient temperature of 20°C (± 5°C). Nice S.p.A.
Page 8
Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...
Need help?
Do you have a question about the DOMIW3C and is the answer not in the manual?
Questions and answers