• All technical specifications stated herein refer to an ambient temperature of 20° C (± 5° C). • NICE reserves the right to make changes to products at any time when deemed necessary, maintaining the same intended use and functionality.
Page 4
KRONO 1WW / KRONO 6WW only rimuovere la protezione MODE MODE KRONO 1WC only Power NO1 NO2 N Moteur INPUT RELAY, OUTPUT 100 - 240V 2x (480W, 2A) 50 - 60HZ 960W, 4A Ø = 3,5 mm 10 mm 2 hex socket head self-tapping screws for plastic.
Page 5
PROCEDURE 1 - To set the transmitter’s BASIC PARAMETERS when it is powered on for the first time or after having deleted its entire memory. (example) (example) (example) KRONO 1WW KRONO 1WC KRONO 6WW 12/24 H 12/24 H FIR 001...
Page 6
PROCEDURE 1.A - To MODIFY A previously programmed BASIC SETTING: • “TIME” (internal date and time); • “12/24H” (time format); • “SUMMER/WINTER” (mode for switching between summer and winter time); • “ZONE” (geographical location of the transmitter). (example) TIME ...
4 TRANSMITTER OPERATING MODES “PROG” mode “AUT” mode PROGRAMMING mode AUTOMATIC OPERATING mode • To enable PROG mode, set the MODE switch to its first position (from the • To enable AUT mode, set the MODE switch to its second position (from the left).
(*2) - The reception of Wind sensor commands cannot be disabled. MANUAL OPERATING mode – For KRONO 1WW To send an ON / OFF command to the sensors: 01. Press key M repea- • To enable MAN mode, set the MODE switch to its third position (from the left).
Page 9
(*A) DO NOT run step 4.A.2 immediately but repeat step 4.A (and step 4.A.1, if desired) for each additional channel you wish to select. Step 4.A.2 must be executed only when all desired channels have been selected. 4.B.1 KRONO 1WW/1WC only. Optional step.. 4.B.2...
Page 10
6.B - SUNRISE / SUNSET option (example) (example) (example) (example) 0:00 2:00 2:00 2:35 TM SUNSET TM SUNSET TM SUNSET TM SUNSET set the NUMBER OF HOURS: from -9 ... 0 ... +9 set the MINUTES 7 - Function NOT present in KRONO 1WC (example) (example) SENSOR OFF...
Page 11
(example) (example) (example) (example) COPY COPY COPY COPY PASTE E1 PASTE E7 (first existing event) (primo nome) select a Name (*A) select the EVENT to copy for the copied event (*A) All codes from E1 to E30 display: those already assigned to events (the codes with the symbol *), and those not yet assigned, excluding the code for the original event you copied in step 4.
Page 12
PROGRAMMING EXTRA FUNCTIONS PROCEDURE 8 - To CREATE A PASSWORD (PIN) (the password controls access to Programming mode). CAUTION! - At step 2, keep pressed the ESC key; immediately press the OK key and then release the two keys. (example) (example) ESC OK MODE...
Page 13
“NFC” PROGRAMMING PROCEDURE 11 - To PROGRAM the transmitter via smartphone (the device is fully configurable with smartphones, equipped with NFC technology, through the dedicated APP downloadable from GooglePlay). Only for ANDROID Each parameter will be viewable and Ñ editable from a smartphone. Move the smartphone closer to (*A)
Page 14
Table B - For planning events and recording memorized ones E1 ... E30 = name of - Tm = time of execution - Weekdays: Mon = Monday, Tue = - 1 ... 6 = Channels (KRONO 6WW only). - Sens. = sensors event - Sr = Sunrise Tuesday, Wed = Wednesday, Thu = Thursday, Fri...
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby Nice S.p.A. declares that the radio equipment type KRONO 1WW, KRONO 6WW is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.niceforyou.com/en/support.
Page 16
Nice SpA Via Pezza Alta, 13 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...
Need help?
Do you have a question about the KRONO 1WW and is the answer not in the manual?
Questions and answers