Smeg SA109M-8 Instructions For Use Manual page 17

Instructions for the user
6.6 First use
On the first use, or after a power failure,
display. To be able to start any cooking function, the current time must be set.
Turn the temperature selection knob right or left to
reduce or increase the displayed time.
Keep it in the turned position to reduce or increase
more rapidly.
A few seconds after the last adjustment is made, the
time display will steady and the colon separating the
hours from the minutes will flash to indicate the start
of the countdown.
It may be necessary to alter the current time, for example due to daylight saving
hours; if so, hold the temperature selection knob turned to the right or left until
the value changes.
It is not possible to change the time if the oven is ON.
6.7 Selecting a cooking function
To select a cooking function, turn the function
selection knob right or left.
Once the desired function has been selected, the
oven will begin cooking at the pre-set temperature.
Cooking itself is preceded by a preheating stage,
which allows the oven to heat to the cooking
temperature more quickly.
flashes to indicate that this stage is in progress.
When the preheating stage is over,
lit steadily and a buzzer will sound to indicate that
the food can be placed inside the oven.
will be flashing on the oven's
(Temperature knob)
(Function selection knob)
will remain
19