Top Tube Led Board, Top Spk Led Board, Top Flash Led Board - Sony GTK-XB72 Service Manual

GTK-XB72

2-18. TOP TUBE LED BOARD, TOP SPK LED BOARD, TOP FLASH LED BOARD

8 TOP FLASH LED board block
Note 1: When installing the TOP FLASH LED board
Turn over the TOP FLASH
LED board block.
qd TOP SPK LED board
Note 2: When installing the TOP
SPK LED board, align the
protrusion and hole.
protrusion
qs Draw the protrusion of
TOP SPK LED board
out of the hole in TOP
FLASH LED board.
hole
0 FFC (TOP LED-MAIN)
(28 core) (XP7)
bottom side
front side
23
1 Draw the TOP TUBE LED
block, align the two bosses and two holes.
5 Remove the TOP FLASH LED board
block in the direction of the arrow.
6 Draw the TOP SPK LED board out of the
two grooves in front panel assy block.
qa cable (LA-SA and LB-SB)
connector (4P) (XP3)
terminal
side
9 FFC (LA-RGB)
(28 core) (XP6)
terminal
side
qf TOP FLASH LED
right side
board
board out of the two grooves
in front panel assy block.
4 two screws
(M3 10)
hole
right side
boss
groove
groove
When installing the FFC (LA-RGB) (28 core), pass the
FFC (LA-RGB) (28 core) through the upper side of the
cable (MAIN-TW).
FFC (LA-RGB) (28 core)
speaker unit (TW)
(tweeter: top right)
cable
(MAIN-TW)
bottom side
–
Sony CONFIDENTIAL
For Authorized Servicer
3 TOP TUBE LED board
2 FFC (LA-RGB)
(28 core) (XP4)
terminal side
7 FFC (TOP LED-BOTM LED)
(12 core) (XP4)
hole
terminal
side
groove
groove
top side
boss
left side
front side
TOP TUBE LED board
top side
–
TOP FLASH LED board
front panel
assy
SYS SET