Panel (Top) Assy, Mic Board - Sony SRS-RA5000 Service Manual

SRS-RA5000

2-29. PANEL (TOP) ASSY, MIC BOARD

3 harness (LED-TL~LED-TR~DMIC)
connected to the MIC board.
connector (CN401)
of the MIC board
6 MIC board block
Note 3: When installing the MIC board
block, align the groove and rib.
47
1 two screws
(BVTP3
short
hole
long
front side
top side
arrow
– Inner view –
7 panel (top) assy
8)
4 LED-TL board block
Note 1: When installing the LED-TL board block,
align the two holes and two bosses.
hole
2 Lift up the LED-TL board block
in the direction of the arrow.
boss
boss
soft cloth, etc.
Note 2: When working with the side other than
the bottom side facing downward, lay
a soft cloth, etc. so as not to damage.
• Pasting position of the sheet (MIC)
5 two screws
(BVTP3 8)
groove
rib
Sony CONFIDENTIAL
For Authorized Servicer
guide line
sheet (MIC)
8 sheet (MIC)
9 MIC board
SYS SET