Smeg S45MCX1 Instructions For Use Manual page 16

Hide thumbs Also See for S45MCX1:
Table of Contents

Advertisement

Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO)
this function. To use the oven normally, set OFF SHO.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
7.6.2
This function allows the oven operation if there are limitations in the mains
power (e.g. 3 kW for Italian market). The cooking results will not be
affected but the cooking duration will be increased on some functions that
activated more than one heating element.
With the oven in OFF status (see point "7.2 Operating settings") keep PT1
pressed until the message OFF SHO appears on DSP1. Now press PT1
once again and the message "OFF 2000" will appear on DPS1.
Turn PT1 to the right or left to activate (ON 2000) or deactivate (OFF
2000) this function, which limits the oven's maximum power absorption, in
any function, to 2000 W.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
7.6.3
With the oven in OFF status (see point "7.2 Operating settings") keep PT1
pressed until the message OFF SHO appears on DSP1. Now press PT1
until the message "OFF BLOC" appears on DPS1.
Turn PT1 to the right or left to activate (ON BLOC) or deactivate (OFF
BLOC) this function, which locks out all the functions and knobs after 3
minutes of operation without any command from the user (when this
system is active, the
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
To exit the lockout status temporarily to modify a cooking program or
select a different function, keep PT1 pressed until the
disappears from DSP2. The required changes can now be made, and 2
minutes after the last setting is made the lockout will come into operation
again.
To deactivate the lockout permanently, access the secondary menu and
switch the function off as described in this section.
15
Instructions for the User
Power selection function
Child safety lock-out function
symbol appears on DPS2).
GB-IE
symbol

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents