Smeg S45MCX1 Instructions For Use Manual page 12

7.4
In the ON state only, a cooking function can be selected by simply turning
PT2 to the right or left. The function selected will change colour to orange
on DSP3. The preset cooking time will be displayed on DSP1 and the
preset parameters (temperature, microwaves power, weight) are displayed
in alternation on DSP2.
7.4.1
After selecting this function press PT1 to set the parameters and the
duration light
the preset cooking duration.
Press PT1 to validate and the microwaves power light
Turn PT1 to the right or left to change the preset microwaves power.
Press PT2 to immediately start the cooking process or otherwise press
PT1 to set a different time for the cooking process start (please refer to
point "7.4.11 Delayed Start Time (Automatic cooking)").
7.4.2
After selecting this function press PT1 to set the parameters and the
duration light
the preset cooking duration.
Press PT1 to validate and the microwaves power light
Turn PT1 to the right or left to change the preset microwaves power.
Press PT2 to immediately start the cooking process or otherwise press
PT1 to set a different time for the cooking process start (please refer to
point "7.4.11 Delayed Start Time (Automatic cooking)").
7.4.3
After selecting this function press PT1 to set the parameters and the
duration light
the preset cooking duration.
Press PT1 to validate and the microwaves power light
Turn PT1 to the right or left to change the preset microwaves power.
Press PT1 to validate and the temperature light
Turn PT1 to the right or left to change the preset temperature.
Press PT2 to immediately start the cooking process or otherwise press
PT1 to set a different time for the cooking process start (please refer to
point "7.4.11 Delayed Start Time (Automatic cooking)").
The temperature light
reached the set value.
11
Instructions for the User
Selecting the function
Microwaves function
starts to blink. Turn PT1 to the right or left to change
Microwaves+ Grill Element function
starts to blink. Turn PT1 to the right or left to change
Microwaves+ Round Heating Element + Fan function
starts to blink. Turn PT1 to the right or left to change
will blink until the cavity temperature has
GB-IE
starts to blink.
starts to blink.
starts to blink.
starts to blink.