Smeg S45MCX1 Instructions For Use Manual page 14

7.4.8
After selecting this function press PT1 to set the parameters and the
duration light
the preset defrosting duration.
Press PT2 to start the defrosting process.
The microwaves power will be automatically varied to achieve the best
thawing results.
7.4.9
After selecting this function press PT1 to set the parameters and the
duration light
the preset food type displayed on DSP1.
Press PT1 to validate and the weight light
Turn PT1 to the right or left to change the preset food weight.
Press PT2 to start the defrosting process.
The defrosting time will be calculated based on the food's type and weight
and the microwaves power will be automatically varied to achieve the best
thawing results.
The following table shows the defrosting by weight function programmes,
indicating weight intervals, and defrosting and standing times (in order to
ensure the food is of a uniform temperature).
PROGRAMME
PR 01
PR 02
PR 03
PR 04
PR 05
7.4.10
After selecting this function press PT1 to set the parameters and the
duration light
Turn PT1 to the right or left to change the preset Pizza weight.
Press PT2 to start the cooking process.
7.4.11
When PT1 is pressed to define a delayed start time the corresponding
light
"Auto".
Turn PT1 to the right or left to change the delayed start time.
Press PT2 to validate the delayed start time.
The oven enters in an idle state waiting for the defined start time. DSP3
shows the selected function and DSP1 and DSP2 show all the defined
parameters for the function continuously alternating.
If you wish to start the function before the selected time, just press PT2.
If you wish to cancel the programming, press PT2 for 3 seconds.
13
Instructions for the User
Defrost by Time function
starts to blink.Turn PT1 to the right or left to change
Defrost by Weight function
starts to blink.Turn PT1 to the right or left to change
FOOD
MEAT
POULTRY
FISH
FRUIT
BREAD
Pizza function
starts to blink. The weight light
Delayed Start Time (Automatic cooking)
starts to blink, DSP1 shows the current time and DSP 2 shows
WEIGHT (G) TIME (MIN)
100 – 2000
100 – 2500
100 – 2000
100 – 500
100 – 800
starts to blink.
STANDING
TIME (MIN)
2 – 43 20 – 30
2 – 58 20 – 30
2 – 40 20 – 30
2 – 13 10 – 20
2 – 19 10 – 20
starts to blink.
GB-IE