Table of Contents
Advertisement
Power saving
By displaying the controller's control signal, the display will switch to "Power saving" mode, with the
red power LED indicating.
Model
LED light
On
green
Power saving
red
The power saving mode will be kept until a control signal has been detected or the keyboard or
mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds.
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the monitor is able
to plug-and-play. The DDC is a communication protocol through which the monitor automatically
informs the host system about its capabilities; for example, supported resolutions and corresponding
timing. The monitor supports the DDC2B standard.
Advertisement
Table of Contents
