Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AOpen 32HC5QRP
Summary of Contents for AOpen 32HC5QRP
- Page 1 AOPEN LCD Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ AOPEN and the AOPEN logo are registered trademarks of AOPEN Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
- Page 3 Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. AOPEN monitor is purposed for video and visual display of information obtained from electronic devices. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem.
- Page 4 Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions.
- Page 5 • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
- Page 6 We at AOPEN are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
- Page 7 LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use.
- Page 8 Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •...
-
Page 9: Table Of Contents
Contents Unpacking....................1 Installing/removing base ................2 Adjusting screen position................4 Connecting the power cord................. 5 Safety precautions ..................5 Cleaning the display ................... 5 Connector pin assignment ................7 Standard timing table.................. 8 Installation ....................9 User control ....................10 Troubleshooting .................. -
Page 10: Unpacking
Unpacking When you unpack the box, ensure that the following items are present, and retain the packing materials for future shipment. • LCD monitor • Quick start guide • Power adapter • DP cable • HDMI cable (optional) -
Page 11: Installing/Removing Base
Installing/removing base Note: Unpack the monitor and base first. Carefully place the monitor face down on a flat surface - use a cloth pad to prevent scratching the screen. 1. Attach the monitor stand arm to 2. Secure the monitor to the arm of the the base. - Page 12 Follow these instructions to remove the base from the monitor. Note: Carefully place the monitor face down on a flat surface - use a cloth pad to prevent scratching the screen. 1. Remove the base cover. 2. Removing the stand base from the Release the 4 black screws with monitor.
-
Page 13: Adjusting Screen Position
Adjusting screen position For the best viewing position, adjust the display tilt. • Tilt See the illustration below for an illustration of the tilt range. -
Page 14: Connecting The Power Cord
Connecting the power cord (I) AC power • Please first ensure the power cord you are using is the correct type required in your area. • This monitor uses universal power and can run on 100/120 volts or 220/240 volts AC. The user does not need to make any adjustments. •... - Page 15 • Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case. • AOPEN is not responsible for damage caused by the use of any ammonia- or alcohol-based cleaners.
-
Page 16: Connector Pin Assignment
Connector pin assignment 20-pin color display signal cable* Threading Explanations Threading Explanations Channel 0 real signal Monitor ground Monitor ground Channel 3 auxiliary signal Channel 0 auxiliary Reserved (protocol pull) signal Channel 1 real signal Reserved (protocol pull) Monitor ground Auxiliary channel real signal Channel 1 auxiliary Signal detection... -
Page 17: Standard Timing Table
Standard timing table Mode Resolution Remarks IBM VGA 720 × 400p 70 Hz IBM VGA 640 × 480p 60 Hz VESA 640 × 480p 72 Hz VESA 640 × 480p 75 Hz VESA 800 × 600p 56 Hz VESA 800 × 600p 60 Hz VESA 800 ×... -
Page 18: Installation
Installation Follow these steps to install the monitor on your host system: Steps 1. Turn off your computer and unplug the power cord. 2. Connect digital cable (Dual input models only) a. Make sure the monitor and computer are powered off. b. -
Page 19: User Control
User control Basic controls Number Icon Description Go to the main menu. Enter the source mode. Enter the switch mode menu. Enter brightness adjustment. On/off... - Page 20 Adjust OSD settings Note: The following is for general reference only. Actual product specifications may vary. OSD (On Screen Display) can be used to adjust the settings of the LCD display. Press the MENU button to open the OSD. Use the OSD to adjust image quality, OSD position, and general settings.
- Page 21 Feature page Double-press Button 1 to select the menu function, and then use Buttons 1/2/3/4 to adjust the settings you need. When finished, use Button2 to return to the previous level or exit the menu. Picture adjustment 1. Double-press Button 1 to bring up the OSD. 2.
- Page 22 6. Black Boost: This feature increases the richness of the display's dark levels - black becomes less black. The higher the setting, the greater the increase. 7. Blue Light: Filter blue light by adjusting different blue light display ratios (80%, 70%, 60%, 50%). Note: The higher the value, the more blue light is displayed.
- Page 23 Color adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select Color from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4.
- Page 24 Volume adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select Audio from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4.
- Page 25 Game adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select Game from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4.
- Page 26 OSD adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select OSD from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4.
- Page 27 System adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select System from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4.
- Page 28 Product information 1. View the basic information of the machine. 2. Reset All Settings: Reset all settings to factory defaults.
-
Page 29: Troubleshooting
Troubleshooting Before sending your LCD monitor for repair, go through the troubleshooting checklist below to see if you can diagnose the problem. (DP mode) Problem Status Solution LED lights up • Press the standby button to turn on. • Check the power switch. LED off •... - Page 30 (HDMI mode) Problem Status Solution • Please use the OSD to maximize LED lights up brightness and contrast, or reset it to a preset value. • Check the power switch. LED off • Ensure that the AC power adapter is No picture properly connected to the monitor.