Chapter 1 Product Introduction 1.1 Product introduction DT3239D is an embedded product. The original intent of this product was to create a product that is truly suitable for high performance, high reliability and ease of use in a variety of complex environments.
Chapter 2 Touch Display Installation 2.1 Touch display installation instructions Each DT3239D should contain the following items: Bracket*4(up and down) Bracket*4(left and right) Touch display *1 HDMI cable*1 Power cable *1 OSD Controller *1 USB cable *1 M4*8 screw*16...
2. The part of the L-shaped side strip with two feet is upward. The strip hole of the L-shaped strip is aligned with the two mounting holes of the DT3239D, and is locked with M4 screws. 3. The remaining three sides of the L-shaped bracket repeat the operation in the second step.
2.5 Interface connection Note: Make sure the computer and touchmonitor are turned off before connecting the cable to your touchmonitor and PC. 1. Connect the USB cable to the touchmonitor and the host computer; 2. Connect the HDMI signal cable to the host computer and touch display;...
Chapter 3 Operating Instructions 3.1 Adjust the touch display Touch displays may require user adjustments to achieve optimal performance in video output and application performance, and touch displays should work at optimal resolution, which is 1920x1080. The touch display's OSD operation menu has a memory function that automatically memorizes all control adjustments.
3.1.2 Power management system When the display is not working, the screen will turn off the LCD backlight and automatically sleep to reduce power consumption. Power state: Power consumption: Open state <45W Sleep state <4W Closed state <2W When the touch display is not used for a long time, the power should be disconnected.
Page 9
Touch display brightness is Please refer to the third section for instructions on adjusting the brightness of the liquid crystal; 1) During operation, the monitor screen may be set to automatically turn off after a period of time to save power. At this point, just press any button to get it back to work;...
The optimal resolution of the display is the best working resolution of the display, at which the display can achieve the best display. The DT3239D has an optimal resolution of 1920 x 1080. In general, it is recommended to use the monitor at the optimal resolution.
1. In order to reduce the risk of electric shock, please observe all safety precautions, do not open the rear cover of the touch display; 2. Turn off the power before cleaning the monitor; 3. The power socket should be installed near the equipment for convenient to use;...
Page 12
any strong solvent. Do not use thinner, abrasive cleaners or compressed gas to wipe the surface of the touchmonitor. • When cleaning the monitor, please use a cleaning cloth to take a neutral detergent,and wipe it with a slight force.. •...