Table of Contents
Advertisement
5. Daily Operation
5.1 Main power switch
The monitor is switched on or off with the main switch, sees image 1-2 Control key.
5.2 Power/Status indication
During start-up the monitor performs signal detection before going into normal operation
mode. Depending on the detection result, the status LED on the side of the monitor will show
different LED color.
Below is an overview of the possible status LED modes:
LED Color
OFF (No LED)
Blue, static
Amber, static
Status LED modes
OFF mode
Normal mode
Stand-by mode
(Power saving)
Operation Description
Monitor is not powered.
Monitor is ON, video sync OK.
Automatically enters power saving and standing by
for input signal
26 / 42
Advertisement
Table of Contents
