Cleaning And Maintenance - HOMCOM 824-010 Manual

SPEED Button :
• There is 3 speed of the fan for choose:
0 - It's the power offer button to stop the fan working
1- Low
2- Medium
3- High
MIST Button :
• Put some water into the water tank (16), and tighten up the lock nut. And put it back to the
fan.
• When the mist function is selected the water indicator light on in blue color .
• If the water tank (16) is empty (No water), the indicator light will be light on in red color.
Noted: The mist function and speed function can be worked independent, or together.
OSCILLATION Button :
• Press the oscillation button (9) to activate the automatic oscillation from right to left.
• Handup the oscillation button (9), the oscillation will be stop.

CLEANING AND MAINTENANCE

GB
NOTED: Before cleaning the appliance always disconnect the power plug from the
receptacle.
1. DO NOT dip the device in water, or splash it with any other liquids.
2. DO NOT use solvents or any other chemical products for cleaning it. When you do not
use it, after cleaning it, store the fan in a dry place.
3. When you have finished using the fan at the end of the season, wipe off any dust to
maintain it in good working order for the next season; if necessary disassemble the grille and
remove the fan; clean them with a soft damp cloth.
Remove the water tank and clean it with lukewarm water; before replace the water
4.
tank in the unit make sure it is completely dry.
7