Mode; Timer (0.5 - 7.5 Hours); Oscillation; Remote Control - HOMCOM 824-012V70 Manual

MODE

• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of MODE (5), to select the fan mode.
• 3 mode for select: (NORMAL / NATURE / SLEEP).
• The default mode is NORMAL, and the SLEEP/NATURE mode with the
indicator be light up.

TIMER (0.5 - 7.5 HOURS)

• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of
Hours)
• It will now remain in operation until the selected period of time runs out.
• After the timer runs over , the device will turn off.

OSCILLATION

• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of OSCILLATION (6), appliance will swing from Left to Right.

REMOTE CONTROL

• All the function above can be setting by remote control

CLEANING AND MAINTENANCE

Before cleaning the appliance always disconnect the power plug from
the receptacle.
• The appliance, the power cord and the power plug should not be immersed
in water or other liquids when you are cleaning them. Clean them with a dry
cloth.
• If it is very dirty, the outside of the appliance can be wiped carefully with a
moist cloth and then dried carefully. Make sure that no moisture penetrates
into the interior of the appliance.
• Do not use any harsh cleaners, steel brushes, scouring powder or other hard
objects to clean the appliance as these can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene or oil-based cleaners as these can damage the
housing.
• Re-tighten visible screw connections on the appliance regularly in order to
ensure that the device is functioning properly.
TIMER (3) to the desired time period (0.5-7.5