Table of Contents
Advertisement
06 CONNECTING TO A TV
Connecting via Wi-Fi
Pre-connection Checklist
• Wi-Fi connection is available only on Samsung TV.
• Check whether the wireless router (Wi-Fi) is turned on and the TV
is connected to the router.
• The TV and Wireless Speaker must be connected to the same
wireless network (Wi-Fi).
• If your wireless router (Wi-Fi) uses a DFS channel, you will not be
able to establish a Wi-Fi connection between the TV and Wireless
Speaker. Contact your Internet service provider for details.
• Because the menus may differ depending on the year of
manufacture, refer to your TV manual.
1. For more information about Wi-Fi connection to the Wireless
Speaker, see page 7, "Method 1. Connecting the SmartThings App
(Wireless Network)".
2. Change the input source of the TV by using the Audio menu to
Wireless Speaker.
• Samsung TVs released in 2017 or later
Sound → Sound Output → Music Frame (Wi-Fi)
Connecting to a TV that supports Dolby
Atmos
Pre-connection Checklist
• Make sure that the content supports Dolby Atmos®.
TV menu
1. Connect the Wireless Speaker and TV to the same wireless network
(Wi-Fi).
2. For sound output of the TV, select Wireless Speaker.
3. TV sound is output from the Wireless Speaker.
NOTE
• When you use Dolby Atmos®: If the input source is Dolby Atmos®,
refer to "Output specifications for the SOUND MODE" on page 8.
• Configuring Dolby Atmos® on your BD player or other device
connected to the TV.
Open the audio output options on the settings menu of your
BD player or other device and make sure that "No Encoding" is
selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream
(unprocessed).
• This function is available in some Samsung TVs and some Wireless
Speaker models.
ENG - 12
Wi-Fi
LED indicator :
‒ White On → Off
Wi-Fi
Advertisement
Table of Contents
