Table of Contents
Advertisement
Method 2. Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear
stereo sound without the hassle of cabling.
• When you connect a paired Bluetooth
device with the Wireless Speaker off,
the Wireless Speaker automatically
turns on.
The initial connection
When connecting to a new Bluetooth device, make sure the device is
within 3.28 ft (1 m) distance.
1.
Bluetooth Pairing button
When in "Bluetooth"
mode
5 Sec
1.
2. On your device, select "Music Frame" from the list that appears.
3. Play music files from the device connected via Bluetooth through
the Wireless Speaker.
If the device fails to connect
• If you have an existing Wireless Speaker (e.g., "Music Frame") in the
list of speakers on the Mobile device, delete it.
• Repeat steps 1 and 2.
Mobile device
LED Indicator
[Pairing]
‒ Red → Green → Blue Blinks
[Connection is complete]
‒ Cyan Blinks X3
Ready to connect via
Bluetooth.
Notes on Bluetooth connection
• Locate a new device within 3.28 ft (1 m) to connect via Bluetooth
communication.
• If asked for a PIN code when connecting a Bluetooth device, enter
<0000>.
• The Wireless Speaker automatically turns off after 18 minutes in
the Ready state.
• The Wireless Speaker may not perform Bluetooth search or
connection correctly under the following circumstances:
‒ If there is a strong electrical field around the Wireless Speaker.
‒ If several Bluetooth devices are simultaneously paired with the
Wireless Speaker.
‒ If the Bluetooth device is turned off, not in place, or
malfunctions.
• Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
Wireless Speaker main unit - e.g., microwaves, wireless LAN
devices, etc.
• The Wireless Speaker supports SBC data (44.1kHz, 48kHz).
• Connect only to a Bluetooth device that supports the A2DP (AV)
function.
• You cannot connect the Wireless Speaker to a Bluetooth device
that supports only the HF (Hands Free) function.
• When connecting the Wireless Speaker to a Bluetooth device, place
them as close to each other as possible.
• The farther the Wireless Speaker and Bluetooth device are from
each other, the lower the sound quality will become.
The Bluetooth connection may break when the devices are out of
the effective range.
• The Bluetooth connection may not function as intended in areas
with poor reception.
• A Bluetooth device may experience noise or malfunction under in
the following conditions:
‒ When the body is in contact with the signal transceiver on the
Bluetooth device or Wireless Speaker
‒ In corners or when there is an obstacle in proximity, such as a
wall or partition, where electrical changes may occur.
‒ When exposed to radio interferences by other products
operating on the same frequency ranges, such as medical
equipment, microwave ovens, and wireless LAN devices.
‒ Obstacles such as doors and walls may still impact the sound
quality even when the devices are within the effective range.
• Note that your Wireless Speaker cannot be paired with other
Bluetooth devices while using the Bluetooth option.
• This wireless device may cause electrical interference during
operation.
ENG - 10
Advertisement
Table of Contents
