Advertisement
During the night
If the device notices a problem with a sensor, a flashing yellow icon will appear for ten minutes
If you notice this, please adjust the sensor that is indicated. The flashing icon will turn from
yellow to green and then disappear
You can also check the sensor status at any time by briefly pressing the user button on the front
of the device
- Solid green lights indicate that the sensors are
connected and working properly
- If a light is flashing yellow, adjust the sensor
that is indicated (see troubleshooting below)
In the morning
In the morning, once the study is complete and you are ready to wake up for the day, remove
the sensors from your body and disconnect the Alice NightOne device.
- Press and hold the user button for five seconds to turn the device off
- Otherwise, the device will turn itself off after 30 minutes
Place the Alice NightOne and all sensors into the carrying case, along with this quick start guide.
Collection of the device will have been arranged by Philips Sleep Support Team.
Should you have any questions or queries please contact the Sleep Support Team on
Freephone 0800 652 0303
Advertisement
