Using The Setup Disk - Panasonic KX-P2130 Operating Instructions Manual

Using the Setup Disk
This printer allows you to select 38 initial setup items shown in the table below. You can select all these items by
using the Setup Disk.
10 СР!" PROPORTIONAL | Selects the desired characters
12 CPI 5 CPI per inch (cpi) or Proportional
15 CPI 6 CPI Spacing.
мы | № | зщ — (| Bein
17 CPI 7.5 CPI
PRINT STYLE FONT DRAFT* PRESTIGE Selects Draft or LQ (Letter
20 CPI
ROMAN SCRIPT Quality) font.
EMULATION EMULATION ESPON*
IBM
SANS SERIF ОСН-В
COURIER BOLD PS
PAGE LINE/INCH
FORMAT
Sets the emulation mode to
Epson LQ-860 or IBM Proprinter
X24E.
Selects the desired lines per
inch (Ipi).
PAGE LENGTH 14 inch 8.5 inch When you select "FREE", the
12 inch 8 inch number increases or decreases
1125 inch 5.5 inch by 1/72" (about 0.35 mm) from
11 inch* FREE 0.5" to 15.0" (about 12.70 mm to
381.00 mm).
The number increases or
decreases by 1/72" (about
0.35 mm).
The number increases or
decreases by 1/72" (about
0.35 mm).
LEFT MARGIN 0* to 78 column (10 CPI) The value number depends on
the CPI selected.
RIGHT MARGIN 2 to 80* column (10 CPI) The value number depends on
the CPI selected.
CTR PRINTHEAD | 10 to 45 (40°) column (10 CPI) The number increases or
(Centering decreases by 1.
printhead)
GRAPHIC
DIRECTION
TOP MARGIN 0.00" to 2.50"
(0.00 cm to 6.35 cm)
0.00"* to 5.00"
(0.00 cm to 12.70 cm)
BOTTOM
MARGIN
BI DIRECTION
UNI DIRECTION'
Graphics are printed left-to-right
only (UNI DIRECTION) or in
both directions (BI DIRECTION).
Text is printed left-to-right only
(UNI DIRECTION) or in both
directions (BI DIRECTION).
TEXT DIRECTION | BI DIRECTION"
UNI DIRECTION
PRINT MODE
*denotes setting when shipped from factory.
31
ie,
=
m
D
оз
ароиј dnjas emul