Security; Precautions - Distech Controls Security EC-BOS-602AX Hardware Installation Manual

Precautions

Precautions
This document uses the following warning and caution conventions:
Cautions remind the reader to be careful. They alert readers to situations where there is a chance
Caution
that the reader might perform an action that cannot be undone, might receive unexpected results,
or might lose data. Cautions contain an explanation of why the action is potentially problematic.
Warnings alert the reader to proceed with extreme care. They alert readers to situations where
Warning
there is a chance that the reader might do something that can result in personal injury or
equipment damage. Warnings contain an explanation of why the action is potentially
dangerous.
Safety Precautions
The following items are warnings of a general nature relating to the installation and start-up of the EC-BOS
Security and expansion modules. Be sure to heed these warnings to prevent personal injury or equipment
damage.
A 15Vdc circuit powers the Remote IO Security Module and attached EC-BOS
Warning •
controller. Disconnect power before installation or servicing to prevent electrical shock
or equipment damage.
Make all connections in accordance with national and local electrical codes. Use copper
•
conductors only.
To reduce the risk of fire or electrical shock, install in a controlled environment relatively
•
free of contaminants.
EC-BOS
•
and control devices. To prevent data loss or equipment damage, do not use them for any
other purposes.
Static Discharge Precautions
The following items are cautionary notes that will help prevent equipment damage or loss of data caused by
static discharge.
Static charges produce voltages high enough to damage electronic components. The
Warning •
microprocessors and associated circuitry within a Remote IO Security Module are
sensitive to static discharge. Follow these precautions when installing, servicing, or
operating the system:
Work in a static-free area.
•
Discharge any static electricity you may have accumulated. Discharge static electricity
•
by touching a known, securely grounded object.
Do not handle the printed circuit board (PCB) without proper protection against static
•
discharge. Use a wrist strap when handling PCBs, with the wrist strap clamp secured to
earth ground.
Remote IO Security Module Hardware Installation Guide
Part Number 05DI-HISCRIO-22
AX
Security controllers and I/O modules are only intended for use as monitoring
Updated: January 2014
Safety Precautions
AX
AX

Security

3