Page 1
TURNTABLE oval über 280 cm Länge Aufbauanleitung 01/ 2024 WERKZEUG: Innensechskantschlüssel SW5 (beiliegend) 16x Zylinderkopfschrauben M6x20 mit Beilagscheiben Aufbau: Die Tischplatte mit Zylinderkopfschrauben am Fuß befestigen. Dabei den Tisch nicht drehen, sondern stehend aufbauen. Achtung: Der Tisch darf nicht inklusive Fuß angehoben werden, da eventuell die Tischplatte reißen könnte! Fuß und Platte immer separat transportieren.
Page 2
TURNTABLE oval longer than 280 cm assembly instructions 01/ 2024 TOOLS: Allen key SW5 (included) 16x cylinder head screws M6x20 with flat washers Assembly: Fasten the table top to the table base with the cylinder head screws. Please do not rotate the table. Set up the table in standing position.
Need help?
Do you have a question about the TURNTABLE oval and is the answer not in the manual?
Questions and answers