System Feet; Removing The System Feet - Dell CGJH2 Installation And Service Manual

Steps
1. Align and insert the bezel tabs into the slots in the system.
2. Press the bezel until clicks in place.
3. Lock the bezel.
Figure 13. Installing the front bezel

System feet

Removing the system feet

Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Place the system on its side on a flat, stable surface.
3. Rotate the system feet inward.
Steps
1. Using the Phillips 2 screwdriver, remove the screw that secures the foot to the base of the system.
2. Repeat the preceding step to remove the remaining system feet.
30 Installing and removing system components