Table of Contents
Advertisement
6.
Troubleshooting
Fault phenomenon
No power
Don't work
Light is out
Body shaking
Suction not strong
Fault cause
a. Power plug is not plugged in or
not plugged in properly
b. Power socket has no power
c. Power in not connected to the fuse
a. Power plug is not plugged in or
the voltage is unstable
b. Button is not pressed
a. Light button not pressed
b. Light is broken
a. Product is not firmly fixed
b. Impeller installation is not in
place
c. Impeller is broken
a. Open the window widely or
closed when use the hood
b. Installation height is not in place
c. Smoke tube is too long or bending
too much
d. Public chimney is narrow or
outlet is not tightly closed
Solution
a. Connect the power plug
b. Connect power or contact electrician
for service
c. Repair or contact electrician for service
a. Connect power or contact electrician
for service
b. Press the button
a. Press light button
b. Repair the light
a. Fixed product firmly
b. Install impeller in place
c. Replace impeller
a. Open or close the window to adjust the
smoke exhaust effect
b. Adjust the installation appropriate
height
c. Reduce the tube length or bending
quantity
d. Enlarge the diameter of public chimney
or make the outlet tightly closed
Page 6 of 20
Advertisement
Table of Contents
